Supplier sign in
Home
STAY INFORMED
Subscribe to our monthly newsletter.
Your email address will never be disclosed to any third party.
Read our privacy notice.

   

News items July 2020

Post your news
UWT NivoGuide® Solutions for tricky level measurement applications Solutions for tricky level measurement challenges
UWT NivoGuide® Solutions for tricky level measurement applications
Solutions for tricky level measurement challenges Looking for precise and safe continuous level measurement even when dealing with difficult process conditions such as a dusty atmosphere, material with a low DK-value, very tall silos or particularly high loads on the probe? Are you faced with strong surface waves, fixings inside the tank or small tanks you wish to fill right to the top? Are you handling material in a high temperature, high pressure or steam environment? Are you confronted with challenges such as Interface Measurement?
21.07.2020  |  2162x  |  Product news  | 
The Lindner Film Examiner Improvement of output quality in film washing systems
The Lindner Film Examiner
Improvement of output quality in film washing systems In recent years Lindner Washtech GmbH has evolved into a technological leader in the field of PE film recycling, now with over 50 washing systems installed worldwide. Many new developments such as the patented pre-washing system Rafter have set new standards in the industry and are now an integral part of every Lindner washing system. The latest in a series of developments for PE film recycling from Lindner Washtech is the Film Examiner. It is placed directly in front of the extrusion phase as a final process to improve the product quality. The device reliably separates small hard contamination particles which are extremely difficult to remove using traditional methods within the washing line due to their specific density and size. These include in particular rigid plastic particles of PP or HDPE, and in addition light aluminium particles and small wood flakes. The Film Examiner is mounted directly in the air stream after the thermal drying process, utilizing the
15.07.2020  |  1665x  |  Product news  | 
UWT managing director expands management team A dynamic trio for a stable future
UWT managing director expands management team
A dynamic trio for a stable future In recent years, UWT GmbH has built up many new customer relationships in a wide variety of countries and regions, opened up new sales channels and gained valuable, competent employees for the company. In order to meet the associated growing challenges with a stable, future-oriented organization, Uwe Niekrawietz decided to form a trio in UWTs Board of Directors. In addition to Managing Partner Uwe Niekrawietz, there are two further Managing Directors since June: Former technical manager Andreas Haug has been appointed as Managing Director for Operations and Technology. Markus Schalk, who had previously been responsible for international sales at UWT, takes over the responsibility on the commercial side with all assigned areas and departments as Managing Director. A lot has going on with the 40th anniversary of UWT GmbH. The company`s course is focused on expansion. Uwe Niekrawietz knows the UWT well and has grown with it since 1997. Since January 1999 as managing director
14.07.2020  |  2045x  |  Press release  |   | 
Profitably closing the plastics cycle The new Varisort+ sorting system from Sesotec combines sustainability and profitability
Profitably closing the plastics cycle
The new Varisort+ sorting system from Sesotec combines sustainability and profitability Schönberg, July 2020 A majority of the plastic that exists will be used just once and will not be recycled. In Europe, only about 30 percent of the plastic produced in 2017 went on to be recycled. Enormous amounts of plastic waste are disposed of in landfills or incinerators, practices that pose risks to air quality, wildlife, public health, and the food chain. On top of that, the oceans are suffering from a flood of plastics: of the estimated 150 million tons of trash floating in the world’s oceans, roughly a third of it is plastic. In order to counteract this development and convert plastic waste into useable raw materials, the EU introduced legislation in October 2018 that requires all plastic packaging to be either reusable or easily recyclable by 2030. As industry has begun to make adjustments to meet this 2030 deadline, the purity of recycled plastics has become a central issue. Recycling plant operators are having to implement preparation processes that can
14.07.2020  |  1799x  |  Press release  | 
High performance screen aggregates for the asphalt industry RHEWUM supplied various asphalt mixing plant operators with new DF screening units for the season.
High performance screen aggregates for the asphalt industry
RHEWUM supplied various asphalt mixing plant operators with new DF screening units for the season. In general asphalt is a mixture of minerals and bitumen as binder. In asphalt mixing plants asphalt mixes are produced by a thermal mixing process of mineral rocks, filler (rock flour), binder (bitumen) and if necessary additives for different requirements. Screening machines are required to classify the mineral rock for these processes. Like for example the Rhewum double Frequency Screening Machine (short DF) - a high performance unit for screening in the medium and coarse grain range. The drive principle of the DF is based on the use of two vibration motors with different speeds. The product is loosened and mixed at the screen inlet due to the large vibration amplitude. The higher frequency at the screen outlet causes even difficult to screen material to be screened due to the higher acceleration. By changing the direction of rotation of the vibration motors at the inlet and outlet, the transport speed of the product can be changed. Advantages include good accessibility
08.07.2020  |  1580x  |  Product news  | 
Fassa bortolo a loyal RHEWUM customer for more than 20 years The leading Italian producer of building products expects two new vibratory screening machines.
Fassa bortolo a loyal RHEWUM customer for more than 20 years
The leading Italian producer of building products expects two new vibratory screening machines. In the Fassa bortolo plants sixteen Rhewum wa screening machines, one Rhewum dfm and one Rhewum mds machine have been performing faithfully in the classification of dolomite, limestone and sand since 1991. For its plant in Brazil, the industry specialist requires screening machines that will be used in the future for classifying limestone and silica sand. The limestone to be classified has a nominal feed capacity of 60 t/h and a maximum of 70 t/h per screening unit, whereas with silica sand it is a nominal 30 t/h and a maximum of 60 t/h. The separation is 4.5 mm, 3.0 mm, 1.2 mm and 0.6 mm with a desired screening of maximum 140 tons per hour. Due to the requirements two screening machines of RHEWUM type WA with triple-deck screening unit and the 60 Hz mains frequency required for Brazil proved to be the optimal solution. Not only the very good quality of our screening machines is decisive for the customer. But also our many years of experience in the uncomplicated
08.07.2020  |  1532x  |  Press release  | 
New specialist for retrofit and modernization Rudolf Landsmann is the new Senior Manager Modernization and Retrofit.
New specialist for retrofit and modernization
Rudolf Landsmann is the new Senior Manager Modernization and Retrofit. RHEWUM screening machines usually have a long lifetime. But often the demands on the machine change during its lifetime. Therefore the machine has to be modernized (retrofit). Due to their long experience our screening experts of the RHEWUM retrofit team are able to realize the complex customer requirements and to make the RHEWUM screening machine fit for new tasks. After studying processing technology at the renowned TU Clausthal in Lower Saxony, Rudolf Landsmann started at Rhewum gmbH in 1987 as laboratory assistant and deputy laboratory manager of the Rhewum technical Center. There he accompanied the research and development of special machines which were then as now designed and manufactured specifically according to customer requirements. Rudolf Landsmann was also significantly involved in the further development of today`s multi-deck plansifter MDS and wet screening machine WAFL. In 1989 the graduate engineer changed to the sales department of Rhewum gmbH and
08.07.2020  |  1447x  |  Press release  | 
Guided wave radar technology for continuous level measurement UWT solution in maceration process
Guided wave radar technology for continuous level measurement
UWT solution in maceration process Guided wave radar technology for continuous level measurement in maceration processes For the cellulose production of a wood manufacturing plant in South America, the guided wave radar was implemented in several water tank constructions within the maceration processes. The modern, high-quality TDR technology ensures a continuous production process of the plant. Uninfluenced by changing process conditions, TDR sensors detect the level reliably and precisely and thus offer optimum support for a smooth process flow. +/-2 mm measuring accuracy & steam compensation A wood manufacturer who has been operating in the forestry, cellulose and paper industry for 100 years was looking for an innovative and durable solution to modernize the level measurement within his plant processes as part of a stronger strategic focus on sustainability. The company is active in Chile, Argentina, Brazil, Peru, Colombia, Mexico, Ecuador and Uruguay and is considered the fifth largest pulp and
07.07.2020  |  1966x  |  Press release  |   | 
PET- Recycling Solutions in South America: Kreyenborg ir-CLEAN® installed Achieving suitability for foodstuff without retrofitting the line
PET- Recycling Solutions in South America: Kreyenborg ir-CLEAN® installed
Achieving suitability for foodstuff without retrofitting the line A PET film or sheet line can be retrofitted with an IR-CLEAN® system made by Kreyenborg GmbH & Co. KG from Senden, Germany, without any problems and, above all, without any time and efforts for reconstruction. Suitability for food production of the semi-finished products and optimization of the production line’s performance are both guaranteed. Recently, these advantageous features have convinced two manufacturers of PET thermoformed trays for foodstuff in South America, who have opted for these ‘Add-on’ modules from Germany for a total of three production lines of a throughput of more than 1,000 kg/h respectively. Now, these plastics processing companies are able to process up to 100% of recycling PET ware and operate on the packaging market with high-quality solutions suitable for food production applications. high decontamination output, FDA and EFSA approvals, a simple and a both energy-efficient and performing process control as well as reduced assembly space
01.07.2020  |  2052x  |  Product news  | 
MORE POSTS
JUN
2020
MAY
2020
APR
2020
MAR
2020
FEB
2020
JAN
2020
DEC
2019
NOV
2019
OCT
2019
SEP
2019
AUG
2019
JUL
2019
PORTALS
Recycling-Portal Schuettgut-Portal BulkSolids-Portal
SIGN UP FOR OUR NEWSLETTER
Newsletter archive
Service and contact
ContactDisclaimerPrivacyAdvertising
FOLLOW US
Linked