T&B electronic GmbH searches service technicians

With 40 years of experience, T&B electronic GmbH offers preventive fire protection for machines and systems. As a VdS-certified specialist installer, T&B electronic creates specific protection concepts for a wide variety of processing operations. The fire protection is always specifically tailored to the individual requirements of the plant - and comes from a single source from installation to commissioning. T&B electronic offers holistic solutions to prevent fires and explosions - comprehensively and reliably throughout the entire production operation. As a VdS-approved installer for spark extinguishing systems and water spray extinguishing systems, T&B electronic also offers infrared cameras and gas extinguishing systems, especially with argon, as well as fire alarm systems according to DIN 14675. Through continuous further development of the product range, the fire protection specialist is always setting new standards with quality and innovation in preventive system-based fire protection.

For the first time, T&B is preparing a certified protection concept in cooperation with VdS The drying of materials is often the prerequisite for their further processing. The drying process, i.e. the thermal removal of water and other liquids, makes the dried goods durable, mixable, grindable or otherwise usable for further process steps. Drying processes have been industrial standard for many decades already. The first belt dryer in Europe, for example, went into operation as long ago as 1907. These days, belt dryers are used in a wide range of different branches. Examples include belt dryers for timber, pharmaceuticals, food, plastics, wastewater sludge and many other organic substances. All these substances have one thing in common: they are combustible and, in combination with a belt dryer, result in a high fire load. The importance of belt dryers in industrial applications has increased significantly over the past few years. Generally, standard series belt dryers have a modular design. They are made up of a product feeding module, a drying module…

For the detection of sparks and embers as well as for the prevention of fire spreading, T&B electronic presents the detectors suitable for these risks. In order to prevent fires and explosions in filters, conveyors, silos, coolers, mills, pellet mills or dryers comprehensively and reliably, individually customized solutions are required. Each of the fire risks in the different plant areas can only be controlled with the most suitable detector. FSM multichannel detector For plant areas in which both sparks and embers can form, T&B electronic GmbH is presenting its FSM multichannel detector at the trade fair in Dortmund. This detector, certified by VdS Schadenverhütung GmbH, detects both sparks and embers. Previously, a specific detector was required for each. If this combination detector is used in areas where sparks and embers are present, the cost of installation and maintenance is reduced - with the same functionality and safety. Hot particles Plant operators can invest this saving in fire protection for downstream processes into which hot particles can be introduced. The FST-lt hot particle detector from…